Polyshield Static Shielding Bags

Polyshield HD ESD Bags are Antistatic Bags which protect sensitive electronic components from electrostatic discharge damage during storage and shipping.

Swiftmode has over 30 years' experience of producing consistently high-quality buried-metal-type shielding bags, which are semi-transparent for easy content identification. We offer a wide range of standard and custom sizes, from 75x100mm to 457x610mm.

Our Polyshield HD electrostatic shielding bags are RoHS and R.E.A.C.H. compliant, ensure low ionic contamination, and are printed as standard in yellow with ESD Association approved logos and batch code.
A tear notch can be provided for easy opening of heat-sealed bags.

Construction
Laminate Layers
Static Dissipative Coating
Clear Polyester Film
Vacuum Deposited Aluminium Shielding Layer
Clear LLDPE Film
Static Dissipative Coating

Properties
  • Physical Properties

    Thickness:    75 microns

    Light Transmission:    40%  ±  2%

    Puncture Resistance:    219 N/mm²  (ASTM E154)

    Tensile Strength:    11 Kg / 25 mm width  (ASTM D882)

    Tear Strength:    1.2 Kg  (Elmendorf)

    Burst Strength:    90 psi  (Mullen)

  • Electrical Properties

    Inner & Outer Layer

    Surface Resistance:    ≤ 1 x 10^11 Ohms  (ANSI ESD STM 11.11)

    Charge Decay:    ≤ 2.0 sec.  5Kv to 50v  (FTMS 101C)


    Aluminium Shielding Layer

    Differential voltage:    < 50v  (EIA 541 Appendix E)

    CPT Energy:    < 25nJ  (ANSI ESD STM 11.31)

  • Chemical Properties

    Polycarbonate Compatibility:

    No attack @ 2500 psi  70°C  (EIA 564)


    Silicone Oil, Amines, n-Octanoic Acid:

    None detected

RoHS and R.E.A.C.H. Compliant

Polyshield CT ESD Bags are specially cleaned Antistatic Bags which provide consistent particle control down to 2 microns.

Our revolutionary, low-cost process means that we are able to meet a price point for clean static shielding bags unobtainable by traditional methods for cleaning the inside of the bag, resulting in less than 3 particles per cm².

Polyshield CT extra-clean electrostatic shielding bags are packed in 100s inside a double layer of LDPE bags, and each batch comes with an independent LPC test report.

If you have a need for clean bags for especially sensitive electronics applications, medical, aerospace or automotive uses etc. we would be pleased to discuss your exact requirements with you.
Share by: